Make and Model: Becker Europa
Classic Car era: 1958 – 1968
Face-plate: Universal metal chrome for Mercedes-Benz 190 SL, Alfa Romeo Giulietta, Lancia Flaminia and many others. Choose between chrome Mercedes knobs with creme white front or universal black knobs with music note.
On-board voltage: 6V and 12V, negative earth / ground only
Output power: 6 Watt
Impedance: 4 Ohm
Rendition: Mono, 1 (4 Ohm) speaker. NOTE: If you want to connect two speakers then you have to use two 8 Ohm speakers connected parallel + to + and – to -, this makes 4 Ohm. This is important otherwise you will damage the internal amplifier.
Wave Range: long wave, medium wave, UKW (FM)
Frequency range UKW (FM): 88MHz-108 MHz (Suitable for the US with extended 108 Mhz scale)
Equipment: station pre-set buttons
Design type: Transistor radio
Year of build: ca. 1963 – 1965
Dimensions unit (width x height x depth in mm): 176 x 51 x 146 (back to front of radio-unit excl. knobs), amplifier: 176 x 51 x 70 mm.
Dimensions face-plate (width x height in mm): 172 x 52
Weight (kg): 2.82
Extra in packaging: speaker plug, fuse, and 3 holed metal mounting strips. These strips are brackets to mount the amplifier to the radio, the amplifier on a different location behind the dashboard and to secure the rear-end of the radio.
Installing: Basic car conditions before installation: Radio prepared car with dashboard openings, 6V or 12V power lead, analog telescopic antenna, standard (dashboard speaker) with wiring.
Handy customers experienced with working and tinkering on classic cars can install a radio by themselves. All others we strictly advise to have their vintage radio installed by an experienced mechanic / electrician / local garage. Our installation kits contain the parts and instructions needed to install a radio in a factory original prepared car. In case your dashboard aperture / mount has been changed by previous owners over the last 40 -50 years you might need, or have to make, different parts to make the radio fit properly.
*1.5 years (18 months) European / US warranty (See About Us / FAQ). In the rare case that a reliable Blaupunkt transistor radio stops working you send it back to us for immediate exchange (in case a comparable unit is in stock) or repair. The radio is sealed before shipping with a unique numbered security seal which cannot be tampered with. If this seal is damaged / broken the warranty will be void.
“Enjoy the Ride!”