SOLD to Germany: Becker MONZA MU 1970 Vintage Original Classic Car Auto Radio, Alfa Romeo, BMW, Fiat, Ford, Mercedes, Lancia, Peugeot, Saab , Triumph, Volvo and Other Cars 1968 – 1974

Here we have a gorgeous Vintage Original 1970 Becker MONZA MU in beautifully refurbished condition! This type of Becker Monza radio was seen in all cars of the late 1960s and early 1970s like Alfa Romeo, BMW, Fiat, Ford, Mercedes, Lancia, Peugeot, Saab , Triumph, Volvo and many others.

This fine radio will fit the 1960s standard dashboard aperture (95 x 42 mm square and with 11 mm holes at 130 mm distance for the knob-shafts). The radio faceplate is too low (180 x 50 mm) to cover the later (from 1974) 1-DIN dashboard aperture of 185 x 55 mm. This fine Becker radio was extensively refurbished and serviced by our specialists. The face-plate is a STYLISH and perfect metal chrome ‘pin-stripe’ model for universal use. The black luxury knobs feature chrome rings, you can also have this radio with plain black knobs if you wish. This beautiful Becker Monza sounds / plays perfectly! See all the technical specifications farther below this page!

This Becker Monza auto radio is MP3 and Bluetooth ready! Stream music from your smartphone to your vintage original auto radio with our wireless Classentials Deluxe Bluetooth Module (Price €99,50) or ‘wired’ Deluxe MP3 Kit (Price €40,00)! Get a €40,00 DISCOUNT on the combination purchase using Coupon code: MP3M in the check-out.

This Becker Monza will be a PERIOD CORRECT addition to your late 1960s and early 1970s European (sports)car! “Enjoy the Ride!”

*1.5 years (18 months) European / US warranty (See About Us / FAQ).

SOLD to Germany.

Description

Make and Model: Becker Monza MU
Classic Car era: 1968 – 1974
Face-plate: Universal metal chrome with pin-stripe inserts for all cars featuring a 1960s and early 1970s dashboard aperture (about 96 x 43 mm square and with 11 mm holes at 130 mm for the knob-shafts). Luxury knobs with chrome rings. Plain black Becker Monza knobs available on request/ exchange.
On-board voltage: 12V, negative earth / ground only
Output power: 5 Watt / 7 watt (music)
Impedance: 4 Ohm
Rendition: Mono, 1 (4 Ohm) speaker. NOTE: If you want to connect two speakers then you have to use two 8 Ohm speakers connected parallel + to + and – to -, this makes 4 Ohm. This is important otherwise you will damage the internal amplifier.
Wave Range: Medium wave, UKW (FM)
Frequency range UKW (FM): 88MHz-104 MHz.
Equipment: Tone buttons, 6-PIN DIN connection for optional external devices (in period cassette players) like the Classentials MP3 kit and the Classentials Bluetooth module.
Design type: Transistor radio
Year of build: ca. 1970
Dimensions unit (width x height x depth in mm): 177 x 42 x 130 (back to front of face-plate)
Dimensions face-plate (width x height in mm): 180 x 50
Weight (kg): 0.9

Extra in packaging: (fitted to the radio) speaker wire, earth / ground cable, 12V wire + fuse, rear support bracket.

Installing: Basic car conditions before installation: Radio prepared car with dashboard openings, 12V power lead, analog telescopic antenna, standard (dashboard speaker) with wiring.
Handy customers experienced with working and tinkering on classic cars can install a radio by themselves. All others we strictly advise to have their vintage radio installed by an experienced mechanic / electrician / local garage. Our installation kits contain the parts and instructions needed to install a radio in a factory original prepared car. In case your dashboard aperture / mount has been changed by previous owners over the last 40 -50 years you might need, or have to make, different parts to make the radio fit properly.

*1.5 years (18 months) European / US warranty (See About Us / FAQ). In the rare case that a reliable Blaupunkt transistor radio stops working you send it back to us for immediate exchange (in case a comparable unit is in stock) or repair. The radio is sealed before shipping with a unique numbered security seal which cannot be tampered with. If this seal is damaged / broken the warranty will be void.

“Enjoy the Ride!”

Additional information

Weight 1 kg
Dimensions 16 × 18 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…