Description
Model: Grundig WK (Weltklang) 4800 Statomat
Classic Car era: 1968 – 1975
Face-plate: Universal, will fit and look great in a variety of exclusive classic cars of the late 1960s ands early 1970s. This top-end auto radio was especially seen in exclusive Italian (sports) cars like Ferrari, Maserati, Lamborghini, Lancia and Fiat (Dino) of the late 1960s and early 1970s. The radio will fit the classic dashboard aperture of 95 x 42 mm with two 11 mm holes (for the knob shafts) at a horizontal distance of 130 mm. To fit the radio in a 185 x 55 mm 1970s 1-DIN radio aperture you have to use a 1-DIN dashboard bracket which we can supply with the radio.
On-board voltage: 12V, Negative earth / ground
Output power: 5 Watt nominal, 7 Watt music
Impedance: 4 Ohm
Rendition: Mono, 1 (4 Ohm) speaker. NOTE: If you want to connect two speakers then you have to use two 8 Ohm speakers connected parallel + to + and – to -, this makes 4 Ohm. This is important otherwise you will damage the internal amplifier.
Wave Range: Long wave (L), Medium wave (M), Short wave (K) and FM / UKW (U)
Frequency range UKW (FM): 88MHz-104MHz
Equipment: Tone control, ‘Statomat’ automatic motorized schannel search, 1 speaker connection, automatic antenna connection, 6-PIN DIN connection to connect external play-back devices like a Classentials de luxe MP3 connection kit OR a Classentials De Luxe Bluetooth Module.
Design type: Transistor radio
Year of build: 1970
Dimensions unit (width x height x depth in mm): 170 x 42 x 130 (behind face-plate to back)
Dimensions face-plate (width x height in mm): 193 x 60
Weight (kg): 1.5
Installing: Basic car conditions before installation: Radio prepared car with dashboard openings, 12V power lead, analog telescopic antenna, standard (dashboard speaker) with wiring.
Handy customers experienced with working and tinkering on classic cars can install a radio by themselves. All others we strictly advise to have their vintage radio installed by an experienced mechanic / electrician / local garage. Our installation kits contain the parts and instructions needed to install a radio in a factory original prepared car. In case your dashboard aperture / mount has been changed by previous owners over the last 40 -50 years you might need, or have to make, different parts to make the radio fit properly.
NOTE: The radio will fit the classic dashboard aperture of 95 x 42 mm with two 11 mm holes (for the knob shafts) at a horizontal distance of 130 mm. To fit the radio in a 185 x 55 mm 1970s 1-DIN radio aperture you have to use a 1-DIN dashboard bracket which we can supply with the radio. The radio comes with wiring, fuse, ground cable and a back support bracket ready to install.
*1.5 years (18 months) European / US warranty (See About Us / FAQ). In the rare case that a Grundig transistor radio stops working you send it back to us for immediate exchange (in case a comparable unit is in stock) or repair. The radio is sealed before shipping with a unique numbered security seal which cannot be tampered with. If this seal is damaged / broken the warranty will be void.
“Enjoy the Ride!”
Reviews
There are no reviews yet.