Make and Model: Becker Europa II STEREO
Classic Car era: 1968 – 1978
Faceplate: Standard Becker pin-stripe suitable for all cars with a 1-DIN dashboard aperture. Chrome bezel with plastic pinstripe insert. Becker radios were factory fitted to Mercedes-Benz cars of the 1960’s, 1970s and 1980s.
On-board voltage: 12V, negative earth / ground only
Output power: 2 x 7 Watt (music)
Impedance: 4 Ohm
Rendition: Mono, 1 (4 Ohm) speaker. NOTE: If you want to connect four speakers then you have to use two 8 Ohm speakers per channel connected parallel + to + and – to -, this makes 4 Ohm. This is important otherwise you will damage the internal amplifier.
Wave Range: AM / FM
Frequency range UKW (FM): 88MHz-108 MHz
Equipment: station pre-set buttons, tone-control, 6-PIN DIN connection for optional external devices (in period cassette players) like the Classentials MP3 kit and the Classentials Bluetooth module.
Design type: Transistor radio
Year of build: ca. 1975
Dimensions unit (width x height x depth in mm): 177 x 42 x 134 (radio back to the back of the faceplate)
Dimensions face-plate (width x height in mm): 186 x 57
Weight (kg): 1.4
Extra in packaging: Speaker plugs, cable shoe for 12V connection, earth / ground cable, dashboard mounting brackets, radio back support bracket.
Installing: Basic car conditions before installation: Radio prepared car with 1-DIN (182.5 x 53 mm) dashboard opening, 12V power lead, analogue telescopic antenna, standard (dashboard speaker) with wiring.
Handy customers experienced with working and tinkering on classic cars can install a radio by themselves. All others we strictly advise to have their vintage radio installed by an experienced mechanic / electrician / local garage. Our installation kits contain the parts and instructions needed to install a radio in a factory original prepared car. In case your dashboard aperture / mount has been changed by previous owners over the last 40 -50 years you might need, or must make, different parts to make the radio fit properly.
*1.5 years (18 months) Global warranty (See About Us / FAQ). In the rare case that a reliable Becker transistor radio stops working you send it back to us for immediate exchange (in case a comparable unit is in stock) or repair. The radio is sealed before shipping with a unique numbered security seal which cannot be tampered with. If this seal is damaged / broken the warranty will be void.
“Enjoy the Ride!”